import crushers import crushers

Importing import crushers, where a crushing and screening line is designed, manufactured and installed after studying the dimensions and specifications of the first and final products as well as the required production capacity, so we are very interested in importing suitable crushers for customers.

types of crushers import crushers are

• jaw crusher
• hammer crusher
• impact crusher

Our company's engineering department designs the project after checking all the influencing factors on the spot.

Subject to agreed specifications and schedule, these crushers can also provide the right mills when materials need to be crushed.

Here we will learn about the crushing process, and jaw crusher in detail:-

What is the crushing process?

In order to make use of the rocks or ores obtained through blast quarries in the mining and construction sectors, the materials must be crushed to reduce their size, this process we call downsizing or crushing.

The goals of downsizing are as follows:

1.) Obtaining the required volume or area for using the raw or material

2.) Allow easy transportation and storage

3.) Separating the different minerals inside the ore and releasing them from each other

4.) Obtain the required volume or area for the fertilization stage.

In general, crushing is carried out in three stages, depending on the required size of the material.

primary crushing

This is the first stage of the crushing process. Generally speaking, the size of the feed material, which is between 800 and 1500 mm, is reduced to between 150 and 300 mm.

secondary crushing

This is the second stage of crushing, the feed size of 150 to 300 mm of rock or ore from the primary crushing process is reduced to between 50 and 80 mm.

triple cracking

This is the third stage of crushing, the size of 50 to 80 mm, of ore or rocks from the secondary crushing process is reduced to between 5 and 12 mm.

We call the machine that does the crushing process a crusher or a crusher.

What is a jaw crusher?

This is a kind of crusher widely used in primary and secondary crushing operations.

It is usually preferred to crush large blocks of hard and abrasive materials.

How do jaw crushers work? working principle of jaw crushers

All jaw crushers feature two jaws: one is fixed while the other is moving.

 The working principle of jaw crushers is based on the reciprocating movement of the movable jaw, which compresses and crushes rocks or ore between them and the fixed jaw, where the material enters the area between the jaws.

The movable jaw moves back and forth against the fixed jaw, and materials fed from the top of the machine are compressed between the two, breaking them into smaller pieces.

When the movable jaw moves away from the fixed jaw, the crushed material is discharged from the crusher at the bottom with the ejected material sizing through the gap between the jaws.

What are the main components of jaw crushers? Main parts and parameters of jaw crushers

Jaw crushers are generally defined by the opening size.

What is the crushing process?

For example, a 900mm x 650mm ripper refers to a 900mm x 650mm inlet crusher.

The main parts and main technical parameters of jaw crusher are presented below.

1. feeding duct
2. flywheel driving
3. V . belts
4. Electrical engine
5. motor holder
6. Set settings and damping
7. hydraulic cylinder
8. switch panel
9. swing jaw
10. unloading
11. fixed jaw